Episode 821 · November 16, 2026

The Best Technology Can't Replace Great Dentistry

Listen on your favorite platform

Leave a review ↓
Apple PodcastsSpotifyYouTubeiHeart

Featured Guest

Dr. Sheila Samaddar

Dr. Sheila Samaddar

View profile →

General Dentist & Clear Aligner Specialist · Academy of General Dentistry National Spokesperson

Academy of General Dentistry · Invisalign · American Academy of Clear Aligners

Read full bio

A third-generation doctor on both sides of her family, Dr. Samaddar started out in her mother's dental office at a young age. Internationally recognized and published by Invisalign for Top Case results annually for the last several years, as well as having a Top 10 case with the American Academy of Clear Aligners, she is the most decorated Clear Aligner GP Provider in the Washington, DC metro area. She serves numerous volunteer roles locally, regionally and nationally with the Academy of General Dentistry, including as a National Spokesperson.

Episode Summary

Are you investing in the right digital technologies, or are you collecting expensive equipment that collects dust? This episode cuts through the noise and focuses on which tools actually move the needle in a modern general dental practice.

Dr. Sheila Samaddar is a third-generation dentist practicing in the Washington, D.C. metro area and one of the most decorated clear aligner providers in the region. Internationally recognized and published by Invisalign for Top Case results annually for several consecutive years, she also holds a Top 10 case distinction with the American Academy of Clear Aligners. Dr. Samaddar has been performing CAD/CAM dentistry since the mid-2000s and serves numerous volunteer roles locally, regionally, and nationally with the Academy of General Dentistry, including as a National Spokesperson. Her combination of long-term clinical experience, in-house milling expertise, and deep investment in continuing education makes her perspective on digital dentistry both practical and authoritative.

In this episode, Dr. Phil Klein and Dr. Samaddar map out a prioritized digital toolkit for general dentists at every stage of their career, from must-have entry-level tools to advanced chairside workflows. The conversation examines where AI-assisted diagnostics genuinely adds value and where clinical judgment must take precedence, why fundamental bonding protocols remain the foundation of durable restorations regardless of how sophisticated your technology is, and how digital tools can transform patient communication and case acceptance when used strategically. What makes this discussion especially valuable is Dr. Samaddar's candid take on ROI, financial risk, and the real-world consequences of buying equipment you are not trained or motivated to use.

Episode Highlights:

  • Intraoral cameras remain one of the highest-value, lowest-cost entry points into digital dentistry. Capturing pre-treatment images of soft tissue inflammation, calculus, chips, and cracks protects the clinician legally, supports insurance documentation, and dramatically improves case acceptance by making pathology visible to patients and family members involved in treatment decisions.
  • Intraoral scanners have become a clinical standard and a patient expectation in most markets. Digital impressions eliminate distortion risk during shipping, accelerate laboratory turnaround, and reduce patient discomfort, though experienced clinicians managing complex full-arch restorative cases may still choose to supplement scans with conventional impressions as a verification step for critical anterior margins.
  • CBCT imaging provides diagnostic capability that two-dimensional radiography cannot replicate, particularly for detecting periapical pathology not visible on conventional films, evaluating margins, identifying cysts, and working up symptomatic patients with negative findings on standard radiographs. The clinical discussion highlights that while cost is a barrier for early-career clinicians, access to three-dimensional imaging is widely considered a diagnostic game-changer across multiple treatment categories beyond implant planning.
  • AI-assisted radiographic analysis can function as a useful second-look diagnostic tool when integrated alongside clinical examination, photography, and radiographic interpretation. However, false positives have been observed in practice, and the clinical consensus in this episode is clear: AI findings should inform but never override the treating dentist's judgment, and patients should understand that AI output is a supplementary indicator rather than a definitive diagnosis.
  • Sound bonding fundamentals, including proper isolation, sequential drying, compatible adhesive systems, and full polymerization, remain the single greatest determinant of restoration longevity regardless of how the restoration was fabricated or delivered. Clinicians who stay within a unified adhesive system reduce incompatibility risk, and this principle applies equally to indirect restorations and attachment bonding in clear aligner therapy, where adhesive strength directly impacts retention and reduces unplanned patient callbacks.

Perfect for: General dentists evaluating digital workflow investments, early-career clinicians building their first practice technology stack, clear aligner providers, and any dental team member interested in how digital tools intersect with patient communication and case acceptance.

If you have ever wondered whether the technology you are buying is actually improving your clinical outcomes or just your equipment closet, this conversation will give you a clear, experience-backed answer.

Transcript

Read Full Transcript

This transcript was automatically generated and may contain errors or inaccuracies. It is provided for reference and accessibility purposes and may not represent the exact words spoken.

AI is great. All the technology is great, but you do have to, as you said, you have to go back to basics and you have to go back to the absolute fundamentals of what you learned in dental school and what you had learned before all this new technology came into play in your own personal professional journey. Welcome to Austin, Texas, and welcome to the Dr. Phil Klein Dental Podcast. Digital technology is transforming dentistry, and today's clinicians have access to remarkable tools, from intraoral scanners and CBCT imaging to CAD CAM, 3D printing, and artificial intelligence. But with so many options available, which technologies are truly worth investing in, and how can they make the biggest impact on patient care? In this episode, we'll explore the digital technologies every dentist should consider and how they're changing the way we diagnose, communicate, and deliver treatment. But we'll also discuss why technology is only part of the equation. The best clinical decisions come from combining the information these tools provide with something no technology can replace, a strong dentist-patient relationship. Careful listening. and a thorough understanding of each patient's needs, concerns, and goals. Because while technology can enhance our vision, it's still sound clinical judgment and time -tested fundamentals that ultimately lead to exceptional patient outcomes. Our guest is Dr. Sheila Samaddar, a third-generation dentist practicing in the Washington, D.C. metro area. She serves numerous volunteer roles locally, regionally, and nationally with the Academy of General Dentistry. Before we get started, I'd like to thank all of you for tuning in. If you're enjoying the show, please follow us on Apple Podcasts and Spotify, and even better, leave a review. By doing so, you're not only showing support for what we do here, but your reviews are instrumental in getting more dental professionals to listen and benefit from our content. We really do appreciate it. Dr. Samaddar, welcome to the show. Thank you so much, Phil, for having me. Yeah, thanks for being on. And as I mentioned to you offline, you did really well as far as your activity with the listeners on your last podcast episode. And I'm sure this one will do the same because you really have a lot of information clinically under your belt that you can share with us. And I think that's really invaluable. So we all know that digital dentistry has evolved rapidly over the past decade. There's a lot of amazing gadgets to buy for our practice, but budget is always a thing, right? We can't buy everything. Theoretically speaking, if a GP could only invest in a few technologies today, they're young, they have bills to pay, but they want to get started in digital workflow, which are must-haves and why? I think my number one recommendation would be an intraoral camera. As we get new patients in and patients that perhaps were inherited through a purchase sale or something like that. If they've been told, oh, we're just going to watch this, but then they see a photo of what's going on in their mouths, I think it's a lot more impressive and convincing that there's something going on versus one of us needing to make another car payment or something. So that's something, that intro oral camera is something that was discussed. all over the place by key opinion leaders a while ago. It's not as sexy now to talk about an intro camera, but you still think it's really important to have in the practice. A gazillion percent. It's just... everyday tool that it does not have a huge price point to get into. There are some cheaper cameras which are fine but if you can you know maybe at least go mid-range I think you're going to get really nice images that you can show to the patient or to a parent or a spouse or whoever might help with the decisions. Or also insurance companies, which we don't like to talk about, but they want to see everything. You know, they basically want your blood type, right? So you can show. That is true. But you do a tremendous amount of clear aligner therapy. So photography to you is absolutely essential, right? You need to have that photo from the front, from the side. What are the main angles that you take? If you're just a GP and not even doing a line work, what would you say? I would actually say I'm actually referring more to instead of retracted photos, I'm talking about a little pen camera that can go into the mouth and take photos of the buckle, the occlusal, just all the different surfaces. And I think a really good thing to do and probably a lot of dentists who have done their years like you and I have will say that they should have taken pictures before they started a prophy on a patient because they're like oh that chip wasn't there before but if you take photos before you do anything showing soft tissue inflammation showing calculus showing chips and cracks and whatnot staining then you've also got a little kind of uh security blanket life insurance not life insurance but you know a little insurance policy that shows that they were looking like xyz prior to you actually doing any work on them right right and you did say you did say intraoral when you started so that's my mistake correct yeah so okay so the intraoral camera what's the what's another one that you think is really something that every dentist should have to have in their practice well i think the intraoral scanner is the next thing. Impressions are fine, they're great, but the problem is if you are sending your work out to a lab and you're putting it on one of these hot trucks you've got the possibility for things to get warped. if it takes three or four days to get there you've got the length of time which everybody's in a hurry these days the image goes directly to the lab and they can start working on it immediately and i think it's better for the patient you're not having impression material run down their throats you're not gagging them and i think they like the technology they want to know that you are trying to do the newest things that are valid, right? We don't need to, like you said before, we don't need to have every bell and whistle. We can't afford every bell and whistle. But there are certain things that are really much more necessary and appropriate for the kinds of work that we're doing on a day-to-day basis. Yeah, and if a patient was at another dentist where they had a scan and then they go back to conventional, traditional materials using a tray, that's a big red flag for that patient going, this dentist is in the Stone Age. Let me ask you this when we're talking about digital scanners. Are there still situations where conventional impressions have any advantage at all over a digital scan or even play a role in modern clinical dentistry? I think there is. When I'm doing a huge restorative case, sometimes I will scan and also take impressions because I just want to make sure that the lab has a couple of different things to look at to compare just in case anything is off. You know, when you're in the back, as long as the margins are sealed, it doesn't have to be, you know, drop dead gorgeous, right? Let's be real. It just needs to be really strong and functional. properly put in but in the front you see every sin that's ever been committed so you need to you've got to have the you've got to have the margins tight and you got to make sure that the you know the margin goes to the gingiva and all this so i just like to double check to make sure that everything's on the same page. Let's talk about CBCT. Now, from the standpoint of being an endodontist, to me, that's the first thing that I would get, right? I mean, besides a microscope. But for a GP, and some dentists that I've talked to, even for GPs, believe that CBCT is the first technology they should buy from the standpoint of diagnosis, right? Because everything is based on diagnosis. So from your perspective, And you've done a lot of different kinds of dentistry. You're, what, a third-generation dentist in your family? Yes, I am. Yeah, so you've been around dentistry since... little girl working in your mother's dental practice, right? Correct. Amazing story. That's for another podcast. But other than implants, where do you think 3D imaging provides, and I'm talking about CBCT, the greatest clinical value to the GP? Well, I think it could just be anything diagnostic that we're looking at, right? So if somebody needs endo, we can see an infection that perhaps is not showing up on a radiograph. Or if we're looking at margins, or we're looking at cysts, or we're looking at just any kind of thing, because sometimes you look at a flat... and you're not seeing anything and the patient's got this big complaint so it is very helpful to have really specific technology like CBCTs now again that's an expensive purchase and it's hard for someone who's starting up there if they want to break away and start their own practice if they worked in a dso you know they're still paying their school debt off but realistically to have a cbct at your fingertips it's really a game changer like you mentioned as far as diagnosis um what other technologies besides the we talked about the scanner we talked talked about intraoral camera we talked about CBCT what about chairside milling so a lot of people want to send their restorations out unless it's something like a really long span bridge or something that I can't make. I probably make 99.99% of restorations in my office. I do send the nice restorative like aesthetic cases. I do send those out to a specialty lab, but everything else I make in-house. And I think it's great. We scan, we design, we mill, we try it in and then bond it in the same day. You have your own lab in-house? Yes. So you have your own. Here's the lab tech. You're the lab tech. Wow. I'm the lab tech. Well, my team does it as well. But, you know, it falls down to me. If somebody else is busy, then I'm, you know, small business owner. We're doing, we're taking out the trash and, you know, doing all this stuff. But it's great because if somebody has an issue, and this has actually happened to me before where somebody came in or they called and they said, I broke my tooth. tomorrow I'm going to Kazakhstan and I'm not going to have access to a dentist for at least six months. And so I can put a tooth in there, you know, because not everybody can do that. And it's shocking to me that more people don't. And a lot of people have had issues where they've lost their temps. They've cracked their temps. I mean, I've even cracked temps. And I promise you, it is one of the most horrid things that you can go through. And I happened to be out of town and it was just really bad. So when you can tell somebody that it'll be a little bit longer in the but then you're done, they're excited. So there's no question chairside milling established itself as a viable same-day dentistry solution. It's been around for a while, and it's been working great for those doctors that employ it. But 3D printing is really emerging as the new and exciting technology. I mean, some of these 3D printers are so small, they're the size of an espresso machine. It's really amazing technology, very impressive to the patient as well. So what I wanted to ask you, You may not have one of these new smaller ones, but with the advanced materials that go with these advanced printers, how do you decide whether to mill your restoration, either chair side or your lab, or actually print a restoration literally right in front of the patient? Well, I think it goes with anything in dentistry. You're going to do what you're most comfortable with and what you've been trained most on. You're going to be better at that, right? So I think it really depends on... individual. They're both viable ways to produce great dentistry. And again, it's just nice because you're going to have this product that you can help your patient with very quickly. The only downside that I see is that if the doctor is the only one who knows how to do it, then the doctor is being pulled away from things that could be outsourced to team members. And so then just training in general needs to be really across the board so everybody can step in if they need to. I'm not a practicing dentist GP. I was an endodontist and I'm retired now. But based on all the conversation that I've had with all these dentists on this show, I would start my practice with a scanner, an intro scanner and a printer. Because with these little printers and the materials that are used with these printers, they're so effective. And the cost to get into the game of making these crowns within an hour. of scanning the patient. The cost is so reasonable compared to getting a milling setup that if I needed to mill, which many cases I would probably do in certain indirect dentistry, I would send it to the lab. I would take the impression and then send it out. But again, like you said, your expertise, you have an in-house lab, which you said you're the certified technician as well as the dentist? Occasionally, occasionally. Okay, occasionally. But do you have a lab person? Well, my whole team knows how to fire the crown and knows how to do everything. You know, loading up the block, ticking it out, setting it up, pressing go. So you've got that workflow. You're all dialed in, right? Yes. Okay, so that goes along exactly what you said. Whatever your strengths are, you pursue your strengths. For someone who hasn't established themselves yet and looking to build something with the new printers, and this is not an episode on 3D printing. This is just one of the technology gadgets that's emerging. But with the new materials and the design AI factor involved that talk to the... I mean, it's just remarkable the strength of these crowns that you could come out with. And like you said, if someone's leaving for another country the next day and you need to make them another crown, you just print another one. Anyway, that's something that the scanner and 3D printer talking to each other with the design software certainly is something that's affordable and kind of a must have at this point. So let's pivot for a second to AI. It's integrated into a lot of the things that we're doing with our digital gadgets. Where do you see AI providing the greatest benefit and where should dentists still rely on their own clinical judgment? Well, that's a really good question. I think it's a combination because with the AI, you can double check things that you think that you see on the traditional radiographs, whether it's bitewings, PAs, or Pano. And I really rely, though, on the fact that I have multiple tools for diagnostic because I have found that with the AI program that I use, it's great. However, it has occasionally given me false positives. And if I'm not really certain, you know, you don't want to just go drilling into things and not be 100% certain that that's actually there. So knowing how to ascertain the proper information and to really compare. visually, clinically, radiographically, and then via AI. You have to be able to use all your tools. And if you're not really getting a clear picture, then hold out. This leads directly into my next question. It's a good segue. We rely a lot on digital technologies more and more. Designing restorations, highlighting disease and potential disease as you continue to follow the same patient over time. It'll alert you to something that you should be aware of. But one of the things that we, really have to pay attention to, even though we have this great technology, is the fundamentals, proper isolation, pulp protection, selecting the right adhesive materials, and following sound bonding protocols. In other words, all the newest and advanced technologies aren't going to save us if our fundamentals are lacking. What are your thoughts on that? Absolutely, because you're always seeing people talking about, oh, amalgams are great because they don't fail, they can last. you know, 9,000 millennia, but you know, and composites don't, but we know that composites, and even if you're bonding in restorations, that if your techniques are not sound, if you are not isolating, as you said, and if you are not, you know, drying properly and bonding properly and curing properly, you know, the whole bit, then of course you're going to have failures or micro leakage or cracks or just something completely dislodging. So I think you have to be really confident with the products you use and also know how to use them. I don't know how many dentists are out there. I think plenty of us that just grab something, we just start using it because, oh, this is how such and such worked. Somebody was teasing me the other day because of Ikea and like, you know, do you even read the directions or you just start putting it together? I'm like, oh, I can figure this out. It's the same thing with dentistry. I mean, everything is formulated specifically and they really give you all these, you know, sometimes they don't even just give you the instructions. They give you like this picture of this and this and this, and this is what you do. Like, you know, just because they know we're not going to read anything. I think you have to find products that you really find that are doing what you need them to do so that you can have the best outcome for your restorations, for your work, for your patients. Yeah. Are you using Selective Edge and using universal bonding agents? Yes. I love the products from Bisco. I think I've talked with you about this before, especially the All Bond, because... For example, when we're bonding attachments for our clear aligner cases, it's so common for people to say, oh, I lost a button and an attachment and whatever. And you just can't have people coming in all the time. and losing these buttons. And the adhesive that they formulated is so incredibly strong that I do not have this problem anymore. And so it goes to the same for these restorations, right? It's this chemical bond that we really need to secure our work into the mouth because, again, we don't want things to come out and break and leak and have to replace them. Yeah, and you stay within the same system when you use adhesive dentistry. I do. I do. I think it rules out incompatibilities. And of course, technical support is really important. I've talked about that on many shows. I think the key thing here is that digital technology is really an enabler. It raises the bar when it comes to diagnosis and helps us identify disease. But at the end of the day, when we're in the operatory, we still have to adhere meticulously to the fundamentals of good clinical dentistry. Because otherwise, All the technology in the world is not going to save us from lack of fundamentals. I do want to ask you this question about how important it is with all the technologies that we have to balance the digital data with listening to the patient's concerns, reviewing their medical history, understanding their symptoms, and essentially building a strong doctor-patient relationship before arriving at a diagnosis and treatment plan. In other words, That patient interaction is still really, really powerful and important in our decision making, not only in the diagnosis, but also the appropriate treatment plan for that specific patient. What are your thoughts on that? I think that our being present is never going to go away. I think that... connecting with the patient. I mean, AI can tell you everything, but if you don't have a connection with your patient, they're not just going to sit there and let you come at them with, you know, an injection and whatnot and a drill. And because they need to trust you and they need to understand, you know, why we're doing a certain procedure and they've got to have asked all their questions and they just have to feel really comfortable. AI is great. All the technology is great. But you do have to, as you said, you have to go back to basics and you have to go back to the absolute fundamentals of what you learned in dental school and what you had learned before all this new technology came into play in your own personal professional journey. For sure. And do you think the digital tools today have a major impact compared to what we had before, which was not much digitally, when it comes to patient education? and case acceptance well you and i come back from the days of when we used to develop in the dark room right we put our films in and took you know x amount of minutes for things to come out and the benefit is instead of putting these films up on the light where nobody can see anything even the dentist can't see what's going on there it was hard it was hard and you still have you still have scrubs at least i do That has fixer stains in it. Oh, yeah. And spots. Like I used to have to replace my scrubs every, I don't know, six months. I'd go through seven, eight sets of scrubs because they were just full of fixer. And it looked like almost like blood was on me. And patients would look at it and they'd see all the stain. Because as an endodontist, we would dip from developer to water to fixer and that stuff. Then you'd hold up the film on a clip and hold it to the light. At least I did because it was. Most of it were periapicals. But you're right. It was difficult to see. So now we're at a different stage. So I kind of cut you off there. But continue that thought, Dr. Samaddar, about how our technologies today connect the dentist to the patient regarding the treatment plan and case acceptance. Well, patients still can't entirely understand what's on an x-ray, of course, because I know dentists. Sometimes you cannot understand what's on the x-ray. Okay, I digress. But when you're looking up on a screen, so I have a screen at the foot of the patient, I have one behind me. And when you're looking at the film, you can make it bigger, you can highlight it, you can circle it, you can invert it. I mean, there's all these different things you can do. And you can show patients things on the film. the ai is actually even nicer because you can say i'm going to show you this but then i'm going to pull up the ai and i'm going to show you how that presents on this and then they can see that as well in addition to any photos that you put up on the screen so all these different ways to show them that there's something going on that there's different things triggering signs that there's something going on i think the visual is so huge because most of us I don't know how you are, Phil, but I am not an auditory person. I am like 90 gazillion percent visual. So if somebody is seeing their cracked amalgam or their broken tooth or whatever it is, I think that's just way more effective than... So you're a dentist that actually gets the patient involved as a kind of a participant, almost like a participant in the treatment. I think that's a good way to do it. I think it's a good... I think most... patients want to be involved in the decision making as far as right they should be now some literally are so fearful of the dentist they just go dr samador do what you need to do don't tell me what you're doing i don't want to know i don't want to see and they don't want to see photos like before during or after right it's like i trust you right no i mean is that like a minority is that 10 of your patients you think or 20 or less it's pretty small i mean i would say I would say like a single digit percentage perhaps. But then I just reassure them and I say, hey, you know what? If you ever wanna see them, I've got the photos. If your insurance company needs to see them, we've got that. They're here for you if you need them. So, and it's again, like it's an insurance policy for you as well so that you can show and you can validate what you did and why. Yeah, I think the more interactive the dentist is, especially in the beginning of treatment with the patient, the more impressive. it is as far as in the patient's eyes, what's going on in that practice. Because if the dentist just converses with the staff member, the assistant, and they get all the digital stuff on the screen, and he or she is kind of saying, okay, MOD. 30, MO on 29, calculus bill, you know, and whatever they do, whatever the GPs are doing, you know, it was me, it was just endo on number 30. But it seems to me that the patient needs to be involved in that conversation and using these digital tools as a way of educating the patient. I think we're past that point. There's too much information out there on the internet and social media. The patients know a lot more than we give them credit for in many cases. So by not giving them the opportunity to be involved in their particular treatment plan, I think could be deleterious to the patient, the dentist-patient relationship. Do you agree with that? Yes. And they want to know, A, if you know what you're talking about. They can tell if you're sort of blowing out some hole. But they want to know that you know. what you're doing. And they also want to know that they're being heard because there are so many dentists who still talk with this like huge jargon that, you know, like you said, nobody knows what they're talking about. And so I do my best really to break things down so that people understand and just like really calm and everyday language. And I don't. talk down to people. I really just say, hey, you know, when you have something, something, and, you know, I do a lot of hand gesturing and whatnot. And I think people really appreciate that because they know that I am concerned that they're really, really understanding what I'm talking about, what I'm recommending, you know, what the situation is. And that's the hugest part of the patient communication process. Yeah. And when you show the patients the AI results, do you let them know that, okay, this is AI. It's not... gospel this is not carved in stone what the results are coming from ai but it's suggesting that we go forward in a certain direction right but you still maintain control over the treatment plan as a doctor right you have to present to the patient that exactly your clinical judgment overrides anything that's ai related at this point is is that how you present it to the patient absolutely and you know how it is too you can get in there and you can think you're you're going to know what you find but there's you know every day is a surprise in dentistry you just you open it up and you're like oh wow okay and um you just have to make your best judgment and they have to trust that you're going to make decisions that's for the best for them you know the best outcome so do you see case acceptance going up over the years since because you've been on both sides you were working as a dentist before any of this stuff was out there basically, right? When you get out of dental school, what was available to you digitally without telling us how old you are? Yeah. Oh my God, I remember. I mean, digital x-rays were pretty much the only thing. I mean, there were some dinosaurs out there with some of the inter-oral cameras. And I actually, when I was working as an associate, so I've owned my practice for quite a while now, but I've been doing CAD CAM since... 2004, 2005. I mean, I've been doing it, I've seen like many iterations. And it was slower, it was clunkier, it was, you know, less precise as far as the designing was concerned. But yeah, I mean, everything gets better. So even though you're a big AI fan, and you've been using technology for a long time, it doesn't sound like you think the dentist is going to be replaced by a robot anytime soon. I think we're safe. You know, as long as we're doing what we need to do, we're not going to get replaced by AI. Nobody's going to be able to afford a robot to do their dental work. And regardless of where we go with technology, the human interaction is always going to be the number one indicator of success, whether it's just educating your patient or The trust factor. Just the trust factor. Absolutely. Absolutely. If you don't have that trust, nothing works. Not only we're talking about dentistry, when you buy a set of tires, if you don't trust the guy who's selling you the tires, you know, it doesn't feel right. It just doesn't. I don't know. Now they want to do new brakes on my car and they want to. drain the transmission fluid and I came in here to buy one tire and now it's I'm up to two thousand dollars and sometimes I came in to get my car washed right now I have to get right I might as well buy another car but the thing is when you trust the person you listen to them and you're much more open-minded so I think digital technology is a great way to help build that trust but not rely on it too much where you compromise that patient, that dentist-patient relationship. That I think is the key takeaway here. What about ROI profitability when using these new tools? Like if a dentist comes out, they're starting their own practice, whether they, like I mentioned, broke away from a DSO, whatever they did, and they don't want to spend the money and they want to stay analog. Do you recommend them going outside of their financial limitations to some extent and bite the bullet and buy the stuff? Because the ROI will bring that efficiency back to them and build that profitability quicker into their practice. So, you know, quickly they'll come out ahead. Well, the problem is you don't want to necessarily talk somebody into buying something they can't afford because we've all seen people who spend $150,000, $60,000 on, for example, CERAC, and then the machines collecting dust in the corner. If they're not already trained on it or they're not highly motivated to learn how to do it, that's something that can wait until they really, really, really think that they're going to use it. Or if they're not producing that many crowns or onlays or veneers at that particular point in their career, there's no reason to get that. Some of these labs do incredible work and it's easy to send stuff out to them and just call it a day. But there are some basics that you should have. And we talked about this already, but digital radiography. always you know compared i mean there's still people developing their films and i'm you know that's hard that's hard to believe that's really hard to believe yes um i think we're getting to the end of that era though because they won't even be able to sell their practice If they own it, if they don't have some of this technology, because nobody's going to take over a practice where they have to buy it and then outfit it with all the digital stuff. Although it might be a lot of dentistry in there if nobody's diagnosed anything before. That's true. That's true. Just the patients of record alone could use that and triple the practice in two years. So as we wrap it up, as you look ahead over the next. five, 10 years, which emerging digital technologies do you believe will have the biggest impact on everyday general dentistry? And what should dentists be doing today to prepare for what's coming next? Well, I think the biggest impact would be with scanners and printers. I think more people are going to adopt those for their in-house work. And I think it's great because While there are benefits to putting temps on, I think the negatives outweigh because if you have leakage, if you have something poorly fitting, like we talked about, if you're traveling and it breaks and you're just really stuck, I think being able to put a restoration in the same day is huge. And then, I'm sorry, the second part of your question? Well, just to prepare for what's coming next as far as understanding, okay, this is where I am in my practice today. And I see this coming down the road, make sure they don't do anything financially that wouldn't make the most sense. And just practice dentistry in a way where they're getting set for the new gadgets that are coming down the road. Phil, we've got a lot of colleagues who do the absolute bare minimum CE. If they need 31 hours for their... every two year you know fulfillment to renew their licenses they're literally taking 30 31 32 at the most and in the last month too the last right before exactly exactly like how do you get by and not ever take any ce i mean i'm i literally have CE every week. I probably get 31 a month, you know, and for the younger dentists who perhaps can't afford that kind of money that some of these classes cost, because some of them are super expensive. There's tons of stuff that's free online. There are many, many organizations. I'm sure the ADA does free stuff. I know people learning, people learning does learning exactly. You know, these, there's all these resources out there and you can, Find information about perhaps procedures that you don't like to do or that you're intimidated by. Because a lot of people try to be good at really everything. And there's probably a handful that can do that. But I kind of call BS on that because I think you need to pick three or four things, be really good at those three or four things, and that's it. That's what our specialists are for, to do the things that we're not that great at. And the CE, you know, back to the CE, it's just, it is the number one indicator of success, I think, moving forward into the new age, if you will. No, I think that was very well said. I think you became a superstar in clear aligner therapy, right? Because of the CE courses you took. I've taken a ton of CE, hundreds and hundreds and hundreds of hours, probably thousands actually at this point. Is that what moved you toward clear aligner therapy in a big way? Well, I started doing clear aligner therapy at the very first course that was offered for general dentists. And that was early 2000s. And I've seen like every iteration and I've, you know, continued building on that knowledge. And I just happened to like that. I don't like, you know, no offense, I don't really like endo. So I haven't really taken- No, that's not offensive. That's great. I know, right? You're helping the profession. Yeah. It's funny when a general dentist says, you know, don't take it personally, but I hate doing root canals. I say, you are the greatest person for the profession. We need a lot more GPs just like you. Well, I think, you know, you got to stay in your lane, right? Don't try to be a superhero. I mean, we've all been there. Like I've tried to do things and I'm like, dang it, why did I start this? You know, and I think just get really good at what you can. And, you know, we've got a lot of people out there that can help us and, you know, steer our patients in the correct direction so that the outcome is good for everybody. Yeah, and find a good mentor. I mean, I think that's important too. Absolutely. That's a huge one. Are you a mentor for some? I mentor a ton of young dentists, and it's just really an honor. Yeah, they're lucky to have you, Dr. Samaddar. They really are, because you have not only the experience, but you have an enthusiastic, fun personality that seems like you'd be very easy to learn from. That's just my opinion. Well, I think that the people who share that same joie de vivre or just the energy and enthusiasm... And we're sort of all naturally drawn to each other. And I love seeing people that are just passionate because I mean, think about all the people are like, I'm in dentistry and I can't wait to retire. Like, I mean, I'm not going to, you know, practice when I'm 98, but I'm sure that I will stay involved in dentistry forever because I love it. I love what we do. I love how it affects people and how it can help and change and whatnot. I just, I'm very excited about these younger dentists and what they're going to bring to the table as they, you know, grow into their careers and, you know, get to where we are. Yeah, no, no, no question about it. Listen, through the selective process, the people that I interview for these shows usually like dentistry or else they wouldn't be doing this interview. So, you know, what I'm seeing through this program is a lot of very exciting, enthusiastic professionals that love their profession and they love their career. But there are a good number of dentists out there that don't feel the same way. They are stressed out. There's burnout. Some people say dentistry is like opera. You either love it or you don't. But I think there's somewhere in between too. I think dentists. feel like, yeah, this is a great profession. But when I'm 65, I'm retiring because there's just so much to do. So it really depends on your practice, the way you think about things, your attitude. And, you know, we determine our own happiness in a lot of ways. But anyway, great conversation. Dr. Samaddar, really appreciate your time. And we'll have you on the show again soon. Thank you so much for your time. Thank you, Phil. I appreciate you having me on.

Clinical Keywords

Dr. Sheila SamaddarDr. Phil Kleindental podcastdental educationdigital dentistryintraoral scannerintraoral cameraCBCT imagingchairside millingCAD CAM3D printingAI diagnosticsclear aligner therapyInvisalignattachment bondingadhesive dentistryBisco All Bonduniversal bonding agentcomposite bondingisolation protocolpulp protectioncase acceptancepatient communicationdigital radiographysame-day dentistryclear alignersAcademy of General Dentistrygeneral dentistrydental technology ROIcontinuing education dentistrydental practice management

Related Episodes

The New Era of Bulk-Fill Composites: Simpler, Faster, Better?
Restorative DentistryBiomaterials
The New Era of Bulk-Fill Composites: Simpler, Faster, Better?

Dr. Foroud Hakim

The Art of Case Acceptance: Communication, Technology, and Trust
Cosmetic DentistryRestorative Dentistry
The Art of Case Acceptance: Communication, Technology, and Trust

Dr. Todd Snyder

Rate This Episode

Share your feedback with the dental community. Reviews are moderated before appearing on the site.

★★★★★
0/1000

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.